Product Description:
It is a Gigabit L2+ managed industrial bt PoE fiber switch independently. It has 8*10/100/1000Base-T adaptive RJ45 and 2*100/1000Base-X SFP fiber ports. Port 1-8 supports IEEE 802.3 af/at/bt PoE standard, and the single-port PoE power up to 90W. As a PoE power supply device, it can automatically detect and identify powered devices that meet standards and power them through network cables. Powering POE terminal equipment such as high-power wireless AP, network dome cameras, high-power PoE lighting, industrial sensors, and high-power network industrial control equipment through network cables to meet the network environment that requires high-density and high-power PoE power supply. It is suitable for intelligent transportation, Industrial sites such as rail transit, electric power, mining, metallurgy, and green energy construction have established economical, efficient, stable, and reliable communication networks.
Technical Parameters:
| Interface Characteristics |
| Fixed Port |
1*RS232 console port (115200,N,8,1)
2*100/1000Base-X uplink SFP ports (Data)
8*10/100/1000Base-T bt PoE ports (Data/Power)
2 set of V+, V- redundant DC power interface (6 Pin Phoenix terminal)
|
| Ethernet Port |
Port 1-8 support 10/100/1000Base-T auto-sensing, full/ half duplex MDI/ MDI-X self-adaption |
| Twisted Pair Transmission |
10BASE-T: Cat3,4,5 UTP(≤100 meters)
100BASE-TX: Cat5 or later UTP(≤100 meters)
1000BASE-T: Cat5e or later UTP(≤100 meters)
|
| SFP Slot Port |
Gigabit SFP optical fiber port, default no include optical modules (optional single-mode/ multi-mode, single fiber/ dual fiber optical module. LC) |
| Optical Cable/ Distance |
Multi-mode: 850nm/ 0-500m
Single-mode: 1310nm/ 0-40km, 1550nm/ 0-120km.
|
| Chip Parameter |
| Network Protocol |
IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x
|
| Forwarding Mode |
Store and Forward(Full Wire Speed) |
| Switching Capacity |
20Gbps |
|
Forwarding
Rate@64byte
|
14.88Mpps |
| CPU |
416MHz |
| DRAM |
1G |
| FLASH |
128M |
| MAC |
8K |
| Buffer Memory |
4M |
| Jumbo Frame |
9.6K |
| LED Indicator |
Fiber port: L/A (Green), PoE: PoE (Green)
Power: PWR (Yellow), System: SYS (Yellow), Network: Link (Yellow)
|
| Reset Switch |
Yes, (Press and hold for 10 seconds and release, the switch will restore the factory settings) |
| PoE & Power Supply |
| PoE Port |
Port 1 to 8, IEEE 802.3 af/at/bt |
| PoE Management |
Port PoE working status display
Port PoE output priority configuration
PoE power supply total power limit configuration
Power delay start, PoE work and time scheduling
Port PoE output power distribution, PoE on/off, af/at/bt power distribution
|
| Power Supply Pin |
1/2(+)3/6(-) 4/5(+)7/8(-) |
| Max Power Per Port |
90W, IEEE 802.3 af/at/bt |
| Power Consumption |
Standby<8W, Full load<480W |
| Working Voltage |
DC48-57V, 6 Pin industrial Phoenix terminal, support anti-reverse protection. |
| Power Supply |
No, optional 48V/240W or 48V/480W industrial power supply |
